Zoeller Quik Jon Model 102 Replacement Pump , 1/2 HP

The Zoeller 014955 WM266 Replacement Pump delivers dependable performance and compatibility for Qwik Jon Model 102 upflush systems.

Engineered by Zoeller for long-lasting reliability, the 014955 WM266 Replacement Pump is designed specifically for use with the Qwik Jon Model 102 macerating toilet system. This pump provides efficient wastewater removal and quiet operation, ensuring proper system function in both residential and light commercial applications. Built from corrosion-resistant materials, it delivers durability, high performance, and ease of installation.

• Model number 014955 (WM266) identifies the Zoeller Replacement Pump designed exclusively for Qwik Jon Model 102 systems.
• Provides direct replacement compatibility with factory-installed pumps in the Qwik Jon 102 macerating toilet system.
• Designed for domestic sewage and gray water applications in basement or below-grade bathroom installations.

Technical Data & Performance

• Product Type: Replacement Sewage Pump for Qwik Jon systems.
• Brand: Zoeller.
• Compatibility: Designed for use with Qwik Jon Model 102 upflush systems only.
• Motor Type: Submersible electric motor – hermetically sealed for quiet, maintenance-free operation.
• Motor Power: 1/2 HP (typical for Qwik Jon configuration).
• Voltage: 115V AC, single-phase.
• Frequency: 60 Hz.
• Amperage: Approximately 7.5A running load (nominal).
• Pump Type: Centrifugal, non-clogging design suitable for effluent and sewage transfer.
• Discharge Size: 1-1/2 inch NPT outlet connection.
• Flow Capacity: Up to 60 GPM (gallons per minute) at low head conditions.
• Maximum Head: 21 feet of vertical lift (approximate performance).
• Impeller Type: Non-clogging, engineered thermoplastic impeller for solids-handling performance.
• Solids Handling: Up to 3/4-inch spherical solids.
• Pump Housing Material: Cast iron and corrosion-resistant thermoplastic components for long service life.
• Shaft Seal: Carbon and ceramic mechanical seal for leak-free motor protection.
• Bearings: Oil-lubricated upper and lower ball bearings for quiet, smooth operation.
• Cooling Method: Oil-filled motor housing for efficient heat dissipation.
• Mounting Type: Direct-fit replacement within existing Qwik Jon 102 basin assembly.
• Cord Length: 10 feet (standard) power cord with molded plug for easy connection.
• Thermal Protection: Built-in automatic overload protection prevents motor damage from overheating.
• Operation: Automatic float switch controlled pump cycling for reliable level-based activation.
• Temperature Rating: Operates in fluid temperatures up to 130°F (54°C).
• Noise Level: Low-noise design for residential and light commercial use.
• Application: Ideal for upflush bathroom systems, basement installations, and remote waste disposal.
• Maintenance: Low-maintenance sealed design; inspect float operation periodically.
• Safety Features: CSA and UL listed for electrical and mechanical safety compliance.
• Installation: Plug-and-play replacement for existing Qwik Jon 102 units; no modification required.
• Weight: Approximately 18–20 lbs depending on configuration.
• Warranty: Covered by Zoeller’s Limited Manufacturer’s Warranty ensuring quality and reliability.