Zoeller 1/4 HP Automatic Sump Pump , 9' Cord Included

Details

Model: 49-0005
Manufacturer: Zoeller Pump Company
Series: Water Ridd’r III 49
Part Number: 1862983
Description: Submersible sump pump, 1/4 HP, 115V, single phase, with factory-set float switch and non-clogging vortex impeller.

Product Overview

The Zoeller 49-0005 Water Ridd’r III Submersible Sump Pump is designed for efficient groundwater and sump drainage applications where reliable operation and compact dimensions are required. Engineered with a corrosion-resistant cast iron housing and a thermally protected 1/4 HP motor, this pump delivers 32 GPM at standard head conditions and supports a maximum head of 18 feet. The factory-set vertical float switch ensures consistent pump activation range without hang-up risk, while the non-clogging vortex impeller design allows free passage of debris, reducing maintenance intervals. The sealed ball bearing construction ensures long operational life under continuous or intermittent service conditions.

Technical Specifications

• Manufacturer Part Number: 49-0005
• Alternate Part Number: 1862983
• Pump Type: Submersible Sump Pump
• Series: Water Ridd’r III 49
• Horsepower: 1/4 HP
• Motor Type: Single-phase, single-seal motor
• Electrical Rating: 115V, 60 Hz, 4 A
• Speed: 3450 RPM
• Power Cord: 3-wire configuration
• Discharge Size: 1-1/2 inch NPT outlet
• Flow Rate: 32 GPM at standard operating head
• Maximum Head: 18 feet
• Impeller Type: Non-clogging vortex impeller
• Seals and Bearings: Single mechanical seal; oil-lubricated ball bearings
• Thermal Protection: Built-in motor overload protection
• Operating Temperature: Rated for continuous operation up to 104°F (40°C)
• Construction Material: Cast iron housing and base
• Pump Height: 10-1/2 inches
• Pump Width: 8-3/32 inches
• Switch Type: Factory-set float switch with fixed range
• Mounting Configuration: Freestanding base designed for sump basin installation
• Corrosion Resistance: Powder-coated finish with non-corrosive components
• Application: Sump drainage, groundwater removal, and light-duty dewatering
• Compliance: UL Listed and CSA Certified

Installation Notes

• Install pump on a solid, level surface within sump basin; ensure clearance for float switch operation.
• Connect discharge piping with 1-1/2 inch NPT threaded coupling or flexible adapter.
• Provide check valve on discharge line to prevent backflow.
• Verify electrical circuit rating matches pump voltage and amperage requirements.
• Do not operate the pump dry; ensure water level covers pump housing before energizing.
• Inspect float mechanism for unobstructed travel after installation.

Summary

The Zoeller 49-0005 Water Ridd’r III Series Submersible Sump Pump is a compact, cast iron pump assembly designed for residential and light commercial sump applications. Featuring a 1/4 HP motor, vortex impeller, and integrated float switch, it delivers 32 GPM performance with dependable automatic operation and minimal maintenance in confined sump basins.