Saniflo SaniCOMPACT One-Piece Macerating Toilet – Model 023
The Saniflo SaniCOMPACT is a one-piece, floor-mounted toilet with an integrated macerating pump, engineered for installations where traditional gravity plumbing is not practical. Designed for half-bathroom applications, this unit is capable of discharging vertically up to 9 feet and horizontally up to 100 feet, making it suitable for use in locations such as basements, under-stair areas, and remote additions.
Performance Features
Built-In Macerator: Electrically powered macerator and pump allow for above-floor discharge without requiring a conventional soil stack.
Dual Flush Operation: 1.28 GPF for full flush and 1.0 GPF for reduced flush, supporting water efficiency and performance balance.
Compact Footprint: Designed for installations where space constraints prevent the use of standard toilet dimensions.
Optional Sink Connection: Secondary inlet allows gray water from a lavatory to be processed through the same pump system.
Self-Contained System: No separate tank required; flushing is controlled via push-button actuator on the bowl.
Specifications
Model: Saniflo 023 SaniCOMPACT
Dimensions (WxDxH): 14-1/2" x 21-1/2" x 18-1/2"
Bowl Height: 18-1/2"
Discharge Distance: Up to 9 feet vertically or 100 feet horizontally
Trap Size: 1-1/4"
Flush Volume: 1.28 / 1.0 gallons per flush
Discharge Rate: 13–16 gallons per minute
Inlet Size: 1" side inlet (for optional sink connection)
Power Requirements: 120V, 60 Hz electrical connection required
Installation Considerations
This unit is electrically powered and requires a GFCI-protected outlet. Plumbing connections include a discharge pipe, vent connection, and optional lavatory inlet. The system is engineered for residential powder room or half-bathroom installations and is not intended for full bathroom setups with a shower or bathtub.
Application Suitability
Designed for scenarios where below-grade or remote bathroom installations are needed, the SaniCOMPACT offers a compliant solution for locations where gravity-fed drain lines are inaccessible or cost-prohibitive. Common applications include finished basements, converted attics, garages, and additions without existing drainage infrastructure.
System Components and Features
Push-Button Flush Control: Integrated actuator provides electric flushing without a tank.
Non-Return Check Valve: Built into the discharge elbow to prevent backflow.
Rotating Discharge Elbow: Allows 360-degree orientation to fit job-specific discharge routing.
GFCI Protection Recommended: Enhances electrical safety in wet-area applications.