Compact Utility Pump, 5-MSP 1/6 HP, 1,200 GPH, 10 ft. Power Cord.
13 Available At All US Supply Locations

Details
Model: 5-MSP
Manufacturer: Little Giant
Product Name: Compact Utility/Sump Pump
Part Number: 505723
Description: 1/6 HP manual submersible utility pump, light blue finish, 115V single-phase, 10-foot power cord, 1-inch discharge, designed for portable water transfer, dewatering, and circulation applications.
Product Overview
The Little Giant 505723 (5-MSP) is a compact, submersible utility pump engineered for professional use in light commercial and residential dewatering, transfer, and circulation applications. Featuring a corrosion-resistant epoxy-coated aluminum housing and a permanently lubricated motor, the 5-MSP delivers consistent hydraulic performance in a small, portable form factor. Its 1/6 HP motor provides a maximum flow rate of 1200 GPH at 1 foot of head and is capable of continuous duty operation when fully submerged. The 5-MSP is equipped with a 10-foot power cord, manual on/off operation, and bottom intake screen for efficient water removal to within 1/8 inch of surface level.
Technical Specifications
- Manufacturer Part Number: 505723
- Model: 5-MSP
- Product Type: Submersible Utility Pump
- Horsepower: 1/6 HP
- Motor Type: Permanently lubricated, thermally protected
- Electrical Rating: 115 VAC, 60 Hz, 3.2 A
- Phase: Single
- Power Cord Length: 10 feet, grounded
- Switch Type: Manual operation (no automatic float switch)
- Flow Capacity: 1200 GPH @ 1 ft head; 660 GPH @ 10 ft head
- Maximum Head: 26.3 ft
- Discharge Size: 1 inch FNPT
- Intake Type: Bottom-screen inlet
- Solids Handling Capacity: Up to 1/8 inch diameter
- Shut-off Head: 26.3 ft
- Housing Material: Epoxy-coated aluminum
- Impeller Material: Nylon
- Seal Type: Mechanical seal
- Hardware Material: Stainless steel fasteners
- Operating Temperature Range: 32°F to 120°F (0°C to 49°C)
- Mounting Configuration: Portable or stationary submersible
- Overall Dimensions: 6.12" H x 5.12" W
- Weight: Approximately 7 lbs
- Duty Rating: Continuous when fully submerged
- Finish: Light blue powder coat
- Application: Utility pumping, basement drainage, condensate removal, and water transfer
- Compliance: UL and CSA Listed
Installation Notes
- Place the pump on a solid, level surface where water removal is required.
- Connect 1-inch discharge hose or pipe using compatible fittings to ensure leak-free operation.
- Ensure pump is fully submerged before energizing to prevent dry run damage.
- Do not use for flammable or corrosive liquids; suitable for clear water or wastewater applications only.
- Disconnect power prior to servicing or cleaning intake screen.
- Inspect periodically for debris accumulation or performance reduction in heavy-use environments.
Summary
The Little Giant 505723 (5-MSP) is a 1/6 HP compact submersible utility pump designed for professional use in light commercial, residential, and industrial water transfer applications. With a rugged epoxy-coated aluminum housing, 10-foot cord, and high-capacity output up to 1200 GPH, it provides dependable service in portable or fixed configurations for sump, drainage, or circulation requirements.
Specifications
| Weight | 7.000000 |
|---|---|
| ADA Compliance | No |
| Brand | Little Giant |
| Amperage Rating | 6 2/5 A |
| Application | For Light Commercial and Multi-Purpose Residential Applications |
| Length (inches) | 8.88 |
| Width (inches) | 8.88 |
| Height (inches) | 8.88 |
| Item Height | 0 |
| Item Type | Plumbing & HVAC |
| Manufacturer | Franklin Electric Company, Inc. |
| MPN | 505723 |
| Maximum Head | 26 ft |
| Phase | Single |
| Pump Parts Type | Head Utility Pump |
| Primary Voltage | 120 V |
| Item Returns | This item can be returned |
