3" x 60" Power Vent Pipe, Stainless Steel

Details

Model: 2SVEPWCF0305
Manufacturer: Z-Flex (Novaflex Group)
Product Name: Z-Vent Single-Wall Stainless Steel Gas Vent Pipe with Locking Clamp
Part Number: 23381
Size: 3 inch Diameter x 60 inch (5 ft) Length
Description: Single-wall stainless steel vent pipe section with integrated locking clamp and Double Fail Safe™ self-sealing gasket system. Designed for venting Category II, III, and IV gas-fired appliances in accordance with UL 1738 and ULC S636 standards.

Product Overview

The Z-Flex 2SVEPWCF0305 Z-Vent vent pipe is a precision-fabricated, single-wall stainless steel component engineered for use with condensing and non-condensing gas appliances that require corrosion-resistant venting. Constructed from 430 stainless steel, this 60-inch pipe section provides durability and thermal stability for both residential and commercial mechanical systems. The female end features the Z-Flex Double Fail Safe™ self-sealing gasket, ensuring a secure, gas-tight connection without the need for sealant. Each section includes an integrated locking clamp to maintain joint integrity under positive pressure operation. The Z-Vent system is factory-tested and listed to UL 1738 and ULC S636 for venting of Category II, III, and IV gas appliances.

Technical Specifications

• Manufacturer Part Number: 2SVEPWCF0305
• Alternate Part Number: 23381
• Product Type: Single-Wall Gas Vent Pipe
• Series: Z-Vent
• Pipe Diameter: 3 inches (76 mm)
• Pipe Length: 60 inches (1524 mm)
• Material: 430 Stainless Steel
• Wall Type: Single-wall construction
• End Connection: Male/Female slip-fit with Double Fail Safe™ self-sealing gasket
• Joint Retention: Integrated stainless steel locking clamp
• Temperature Rating: Up to 550°F (288°C)
• Pressure Rating: Positive pressure rated to 15 in. w.c.
• Vent Category Compatibility: Category II, III, and IV gas appliances
• Corrosion Resistance: Resistant to acidic condensate and high-temperature flue gases
• Available Diameters: 3 to 24 inches
• Available Lengths: Standard lengths up to 10 feet (3" and 4" diameters only)
• Cutting Capability: Field-trimmable to required length with standard metal-cutting tools
• Sealing Method: Factory-installed silicone gasket, Double Fail Safe™ configuration
• Mounting Orientation: Suitable for vertical or horizontal vent runs
• Compliance: UL 1738 (U.S.) and ULC S636 (Canada) certified for Category II, III, and IV appliances
• Surface Finish: Mill finish stainless steel
• Country of Manufacture: USA

Installation Notes

• Inspect all components prior to installation to confirm gasket integrity and fit.
• Ensure that gaskets are properly seated in the female end before assembly.
• Engage joints fully, then tighten the integrated locking clamp to secure the connection.
• Do not use additional sealants or adhesives unless specified by the manufacturer.
• Cutting of pipe should be performed with a fine-tooth saw or shear to prevent distortion of ends.
• Install venting in accordance with Z-Flex installation manual, appliance manufacturer instructions, and local mechanical code.
• Maintain all clearance requirements to combustible materials as specified for single-wall systems.

Summary

The Z-Flex 2SVEPWCF0305 Z-Vent 3" x 60" Single-Wall Stainless Steel Gas Vent Pipe is a durable, positive-pressure-rated venting component designed for Category II, III, and IV gas appliances. Fabricated from 430 stainless steel and featuring Double Fail Safe™ self-sealing gaskets with locking clamp retention, it ensures reliable, code-compliant performance in high-efficiency boiler, furnace, and water heater venting applications.