3" x 12" Power Vent Pipe, Stainless Steel

Details

Model: 2SVEPWCF0301
Manufacturer: Z-Flex (Novaflex Group)
Product Name: Z-Vent Single-Wall Stainless Steel Gas Vent Pipe with Locking Clamp
Part Number: 94715
Size: 3 inch Diameter x 12 inch (1 ft) Length
Description: Single-wall stainless steel vent pipe with integrated locking clamp and Double Fail Safe™ self-sealing gasket system. Designed and certified for use with Category II, III, and IV gas-fired appliances operating under positive pressure conditions.

Product Overview

The Z-Flex 2SVEPWCF0301 Z-Vent Pipe is a high-performance stainless steel venting component engineered for gas-fired appliances requiring corrosion-resistant, positive-pressure vent systems. Fabricated from 430 stainless steel, the single-wall pipe delivers durability and dimensional stability for both residential and commercial mechanical systems. The female end incorporates a Double Fail Safe™ self-sealing gasket for a gas-tight connection, while the integrated locking clamp ensures mechanical joint integrity under system pressure. All Z-Vent products are factory-tested and listed to UL 1738 and ULC S636 standards for venting high-efficiency and condensing gas appliances.

Technical Specifications

• Manufacturer Part Number: 2SVEPWCF0301
• Alternate Part Number: 94715
• Product Type: Single-Wall Gas Vent Pipe
• Series: Z-Vent
• Pipe Diameter: 3 inches (76 mm)
• Pipe Length: 12 inches (305 mm)
• Material: 430 Stainless Steel
• Wall Type: Single-wall
• End Connection: Male/Female slip-fit with Double Fail Safe™ self-sealing gasket
• Joint Security: Integrated stainless steel locking clamp
• Temperature Rating: Up to 550°F (288°C)
• Pressure Rating: Positive pressure rated to 15 in. w.c.
• Appliance Category: Category II, III, and IV gas-fired appliances
• Corrosion Resistance: Suitable for acidic condensate and high-temperature flue gases
• Available Diameters: 3 to 24 inches
• Available Lengths: Standard lengths up to 10 feet (3" and 4" diameters only)
• Cutting Capability: Pipe can be field-cut to specific length; ensure proper deburring
• Sealing Method: Factory-installed silicone gasket, Double Fail Safe™ design
• Mounting Orientation: Vertical or horizontal per manufacturer installation guide
• Compliance: UL 1738 (U.S.) and ULC S636 (Canada) listed for gas vent systems
• Surface Finish: Mill finish stainless steel
• Country of Manufacture: USA

Installation Notes

• Inspect all vent components before installation to confirm gasket integrity and correct dimensions.
• Verify gasket is fully seated in the female end before assembly; do not install with damaged or displaced gaskets.
• Engage connections fully, ensuring a tight fit before securing with the integrated locking clamp.
• Do not apply additional sealants unless specifically approved by Z-Flex installation instructions.
• Cut pipe to required length only using approved metal-cutting tools; deburr ends prior to assembly.
• Install in accordance with Z-Flex installation manual, appliance manufacturer’s venting requirements, and local codes.
• Maintain all required clearance distances from combustible materials per single-wall venting guidelines.

Summary

The Z-Flex 2SVEPWCF0301 Z-Vent 3" x 12" Single-Wall Stainless Steel Vent Pipe provides a durable, code-compliant venting solution for high-efficiency and condensing gas appliances. Featuring 430 stainless steel construction, a Double Fail Safe™ self-sealing gasket, and an integrated locking clamp, this vent component ensures gas-tight, secure installation in Category II, III, and IV positive-pressure applications.