3/8" x 100' Vinyl Tubing, Clear

Mars 79132 – 3/8" ID x 100' Clear Vinyl Tubing for Low-Pressure Fluid Transfer The Mars 79132 clear vinyl tubing is designed for use in light-duty liquid and air transfer systems. Constructed from flexible, non-reinforced polyvinyl chloride (PVC), this 3/8-inch inside diameter tubing offers visibility, chemical resistance, and ease of routing, making it suitable for a variety of low-pressure applications in commercial and maintenance environments. This 100-foot roll provides extended reach for continuous runs without added fittings, helping reduce the risk of leaks at joints. It is ideal for applications such as condensate drains, lab fluid lines, air lines, or non-potable water handling. Technical Specifications: Inner Diameter: 3/8 inch Outer Diameter: Approx. 1/2 inch Length: 100 feet (coil) Material: Clear PVC (polyvinyl chloride) Construction: Non-reinforced, smooth bore Working Pressure: 27 psi @ 70°F Temperature Range: 25°F to 150°F Color: Transparent Key Features: Clear Wall – Allows easy monitoring of contents and visual inspection for blockages or flow irregularities Flexible PVC Material – Maintains pliability for routing around equipment and tight radii Low-Pressure Compatibility – Rated for systems operating under 30 psi Smooth Interior – Reduces pressure drop and supports consistent flow Cut-to-Length Capability – Easily trimmed on-site with basic tools Common Applications: Drainage lines for HVAC equipment Non-potable water transport in maintenance systems Air lines for low-pressure equipment Fluid transfer in lab or agricultural settings Temporary or prototype plumbing and discharge setups Installation Notes: Use appropriate barbed or compression fittings to secure connections. Tubing should be clamped or supported at regular intervals to prevent kinks or stress points, especially at bends or transitions. Not intended for use with pressurized potable water or systems exceeding rated temperature/pressure specifications.