3/4 inch x 3/4 inch x 3/4 inch Carbon Steel 4712 RG Gas Press Reducing Tee Press x Press x Fitting

3/4 Inch Carbon Steel Press Gas Reducing Tee – Press x Press x Press

The 3/4 inch Carbon Steel Gas Press Reducing Tee is a mechanically joined fitting designed for use in fuel gas and compressed air systems. Manufactured to meet performance and code requirements, this tee provides a transition point for distributing gas to branch lines in commercial and residential systems. It utilizes a press-fit connection method, reducing installation time and eliminating the need for threading or welding.

Product Specifications

• Material: Cold-formed carbon steel (typically ASTM A513 or equivalent)
• Connection Ends: Press x Press x Press (reduced outlet)
• Fitting Type: Reducing tee for use in rigid piping systems
• Sealing Element: HNBR (Hydrogenated Nitrile Butadiene Rubber) approved for fuel gas applications
• Operating Pressure: Up to 200 PSI depending on system design and approval listings
• Temperature Rating: -40°F to 180°F for fuel gas systems with compatible seals

Compliance and Approvals

• ✅ Listing Standards: CSA LC4, ANSI Z223.1 (NFPA 54), ICC-ES PMG
• ✅ Lead-Free Certification: Not intended for potable water systems
• ✅ Application: Approved for use in natural gas, propane, and fuel oil lines

Installation Considerations

This press-fit tee is intended for installation using manufacturer-specified pressing tools with properly calibrated jaws. Ensure all pipe ends are cut square, deburred, and marked for insertion depth prior to pressing. Use of unapproved tools or deviation from published installation practices may void warranties and affect system performance.

Recommended Applications

Commonly used in gas piping distribution networks, rooftop HVAC utility runs, boiler rooms, and mechanical equipment connections. It is appropriate for concealed and exposed installations, provided local code requirements for gas piping systems are followed.

System Design Insight

Carbon steel press fittings are selected for their mechanical strength and resistance to vibration and temperature fluctuations. The press method reduces labor time and eliminates open flame, making it suitable for occupied structures or retrofit projects where fire protection measures are required during installation.

The 3/4 inch Carbon Steel Gas Press Reducing Tee offers a secure, mechanically joined solution for branching gas lines within pressurized systems. Its compliance with recognized fuel gas standards and compatibility with press tool systems ensures efficient assembly without compromising performance or code compliance.