3/4 inch x 3/4 inch x 1/2 inch Carbon Steel 4712 RG Gas Press Reducing Tee Press x Press x Fitting

3/4 Inch x 3/4 Inch x 1/2 Inch Carbon Steel Press Reducing Tee – Gas Rated

The 3/4" x 3/4" x 1/2" Carbon Steel Gas Press Reducing Tee provides a secure method for branching gas lines in press-connect systems. Designed for use in fuel gas distribution, this tee features a reduced outlet for connecting a smaller branch while maintaining flow through the main line. The press connection design supports efficient, flame-free installation using approved press tools.

Product Advantages for Gas Distribution Systems

• ✅ Carbon Steel Body – Constructed from durable carbon steel with corrosion-resistant zinc-plated coating for longevity in gas applications.
• ✅ Press Connection Interface – All ends feature press-fit geometry for compatibility with standard press tools and jaws (e.g., TH, H profiles).
• ✅ Factory-Installed Sealing Element – Yellow HNBR sealing rings rated for fuel gas service and temperature extremes.
• ✅ Reduced Branch Size – Provides an efficient method for integrating 1/2 inch lines into 3/4 inch systems without separate bushings or reducers.
• ✅ Code-Compliant – Manufactured in accordance with performance standards for fuel gas press fittings, including ANSI LC 4 and ICC codes.

Technical Specifications

• Material: Carbon Steel (zinc-coated exterior)
• Connection: Press x Press x Press (Reducing Tee)
• Nominal Sizes: 3/4 inch x 3/4 inch x 1/2 inch
• Seal Material: HNBR (Hydrogenated Nitrile Butadiene Rubber), gas-rated
• Maximum Pressure: Up to 125 PSI (for fuel gas systems)
• Temperature Range: -40°F to 180°F (depending on system configuration)

Application Use

This carbon steel reducing tee is used in low- and medium-pressure gas distribution systems across residential, commercial, and light industrial environments. Typical installations include branch lines for gas-fired appliances, heaters, boilers, and kitchen gas connections. The press-fit connection allows rapid installation without threading, soldering, or welding, reducing labor time and improving jobsite efficiency.

Installation Considerations

Use with manufacturer-approved press tools and jaws. Inspect sealing elements and pipe ends before pressing. Ensure pipe is cut square and deburred for a proper seal. Not compatible with potable water systems; for fuel gas use only.

The 3/4 inch x 3/4 inch x 1/2 inch Carbon Steel Gas Press Reducing Tee offers a reliable branch solution where press-connect technology is specified. It supports safe, efficient installation and consistent performance in accordance with applicable gas codes.