3/4 inch x 3/4 inch x 1/2 inch Carbon Steel 411 RG Gas Press Reducing Tee Press x Press x Press

3/4" x 3/4" x 1/2" Carbon Steel Press Reducing Tee – Apollo PowerPress

The Apollo PowerPress 3/4" x 3/4" x 1/2" Carbon Steel Press Reducing Tee is a mechanically pressed fitting designed for joining carbon steel piping systems with differing outlet sizes. Engineered for use in commercial and industrial hydronic heating, compressed air, and process piping, this tee provides a reliable connection method with reduced installation time compared to traditional welding or threading.

Manufactured from ASTM A420 carbon steel with a zinc-plated finish, the fitting is suitable for non-potable water, inert gas, and low-pressure steam applications. The press connection ends utilize EPDM sealing elements and are compatible with approved press tools and jaws per manufacturer specifications.

Product Specifications

• Manufacturer: Apollo PowerPress
• Material: Carbon Steel (ASTM A420), zinc-plated
• Configuration: Reducing Tee
• Connection Type: Press x Press x Press (3/4" x 3/4" x 1/2")
• Seal Element: EPDM (factory-installed)
• Pressure Rating: Up to 200 psi (depending on system type and application)
• Temperature Range: 0°F to 250°F (with EPDM seals)
• Certifications: cUPC, IAPMO, ANSI/NSF 61 and 372 (lead-free), and compliant with ASME B16.51

Installation Requirements

Installation must be performed using approved press tools and jaws conforming to the fitting’s profile. Ensure pipe ends are deburred and cleaned prior to insertion. No flame, solder, or threading is required. Press fittings should be marked and verified visually to confirm proper engagement before activation. Pressure testing per code is recommended prior to system commissioning.

Typical Applications

Commonly installed in commercial HVAC, mechanical rooms, industrial fluid transfer, and fire protection systems (where permitted). The reducing tee is used to branch from larger pipe runs to smaller distribution lines without the need for adapters or reducers, improving hydraulic flow and saving space.

Material Note

This product is not intended for potable water unless specifically listed and used with compatible press seal materials. Carbon steel should not be installed in corrosive environments without external coating or isolation. EPDM seals are not suitable for petroleum-based fluids or glycol blends outside of specified temperature tolerances.

The Apollo PowerPress 3/4" x 3/4" x 1/2" Carbon Steel Press Reducing Tee provides a code-compliant, flame-free installation option for pressurized piping systems requiring dimensional reduction and long-term durability under mechanical loads.