3/4" Gas Ball cock Valve

Product Overview

The B&K 110-224HN Gas Ball Valve is a 3/4-inch forged brass, two-piece valve designed for professional-grade gas and fluid control systems. Built for reliability and compliance with industry safety standards, this valve features full port construction, quarter-turn operation, and female NPT threaded ends conforming to ANSI B1.20.1 specifications. Suitable for use in natural gas, propane, and approved water service applications, the 110-224HN is CSA 3-88 and UL listed for dependable service in residential, commercial, and industrial systems.

Technical Specifications

• Manufacturer: B&K
• Model Number: 110-224HN
• Description: 2-Piece Gas Ball Valve – Lever Handle, Female Threaded Ends
• Reference Number: 2032306
• Nominal Size: 3/4 in (19 mm)
• Body Type: 2-piece forged brass construction
• Port Type: Full port for unrestricted flow
• Connection Type: Female Iron Pipe (FIP) threaded ends per ANSI B1.20.1
• Valve Operation: Quarter-turn manual operation
• Handle Type: Zinc-plated steel lever handle with vinyl grip
• Material Construction:
  • Body: Forged brass
  • Ball: Chrome-plated brass
  • Seats: PTFE (Teflon)
  • Stem: Brass with blow-out proof design
• Pressure Ratings:
  • Gas service per CSA 3-88 certification
  • 200 WOG (Water, Oil, Gas) non-shock rating
• Temperature Range: Suitable for standard natural gas and propane operating conditions; water service up to 200°F (93°C)
• Certifications and Approvals:
  • CSA 3-88 Certified for gas service
  • CSA Certified for general use
  • UL Listed for fuel gas applications
• Flow Control: 90° quarter-turn mechanism for full open or closed position
• Applications:
  • Natural gas and propane distribution systems
  • Commercial and residential heating appliance connections
  • Water and low-pressure liquid service (non-potable)
• Installation Requirements:
  • Threaded installation per ANSI B1.20.1 specifications
  • Apply approved thread sealant for gas-rated connections
  • Ensure alignment with flow direction marking before tightening
• Performance Characteristics:
  • Positive shutoff with low operating torque
  • Leak-tight design under rated pressure
  • Corrosion-resistant forged brass construction
• Maintenance: Periodic inspection recommended; replace valve if leakage or wear is detected
• Operating Environment: Indoor or outdoor applications under standard gas service conditions
• Compliance:
  • ANSI B1.20.1 – Threaded pipe connections
  • CSA and UL listings for gas and fluid service
  • Manufactured under ISO 9001:2015 quality system certification
• Country of Manufacture: United States

Summary

The B&K 110-224HN 3/4-inch Gas Ball Valve is a forged brass, two-piece valve featuring full port design, quarter-turn operation, and ANSI B1.20.1 threaded FIP ends. CSA 3-88 and UL approved, it provides dependable shutoff and control for gas and 200 WOG-rated water applications in professional plumbing and mechanical systems.