3/4 inch CPVC 90 Degree Street Elbow Fitting x Plastic

3/4 inch CPVC 90° Street Elbow – Contractor-Grade for Precision Turns

This 3/4 inch CPVC 90° Street Elbow is designed for making compact, right-angle transitions between CPVC pipes in hot and cold water distribution systems. Engineered to meet the dimensional standards of ASTM D2846, it integrates a socket-to-spigot connection format that allows for efficient in-line direction changes without the need for additional pipe sections.

Constructed from chlorinated polyvinyl chloride, this elbow offers enhanced temperature and pressure resistance compared to standard PVC, making it suitable for pressurized potable water systems. Its molded configuration reduces installation footprint, particularly useful in wall cavities or mechanical chases.

Key Advantages for Professional Use

• ✅ Socket x Spigot Configuration – Ideal for direct connections with fewer joints in tight assemblies.
• ✅ High-Temperature Endurance – Rated for continuous service up to 180°F in potable systems.
• ✅ Corrosion and Scale Resistant – Non-metallic material will not degrade under typical plumbing conditions.
• ✅ Meets UPC and NSF 61 Standards – Certified for use in potable water applications.
• ✅ Efficient Installations – Eliminates the need for extra couplings in compact routing scenarios.

Specifications

• Material: CPVC (Chlorinated Polyvinyl Chloride)
• Size: 3/4 inch nominal
• Angle: 90 degrees
• Ends: Slip Socket x Street Spigot
• Pressure Rating: 100 psi at 180°F
• Standards: ASTM D2846, NSF/ANSI 61 & 14, UPC compliant

Installation Guidance

Use CPVC-compatible primer and solvent cement to join socket and spigot ends. Ensure full insertion depth and observe proper curing times per ASTM specifications. Suitable for both vertical and horizontal layouts where angular deviation is required.

Application Scope

This fitting is primarily installed in residential and commercial potable water distribution systems. It's especially valuable in riser drops, fixture branch take-offs, and offset transitions where elbow clearance is limited.

Code Compliance Reminder

CPVC fittings such as this elbow are widely accepted under IPC and UPC guidelines when installed per manufacturer and code requirements. Always verify with local jurisdictional code authorities for specific site applications.