2" x 30' Cork Insulation Tape, 1/8" Thick

Bramec 1006 Cork Insulation Tape – 2" x 1/8" x 30' Roll for Pipe Condensation Control

The Bramec 1006 cork insulation tape is designed for use in refrigeration, plumbing, and HVAC applications where condensation prevention and thermal insulation are required. This tape provides a clean, reliable barrier against moisture accumulation on cold lines and reduces heat loss on hot piping.

Manufactured from resilient cork material with integrated adhesive backing, this tape conforms easily to curved or irregular pipe surfaces. Its flexible construction makes it suitable for field applications involving copper, steel, or PVC piping where conventional insulation may not be feasible.

Key Product Features

• Material: Cork-based insulation with pressure-sensitive adhesive
• Dimensions: 2 inches wide × 1/8 inch thick × 30 feet long
• Operating Temperature: Rated for use up to 120°F
• Adhesion: Designed for direct application to clean, dry pipe surfaces
• Application Range: Effective on both cold suction lines and warm fluid piping

Installation Guidelines

• Ensure all surfaces are clean, oil-free, and dry prior to application
• Wrap tape tightly around pipe, overlapping by at least 50% for maximum effectiveness
• Press adhesive side firmly against surface during installation to avoid gaps or air pockets
• For vertical runs or overhead installations, support may be needed depending on pipe orientation

Use Cases and Application Notes

This insulation tape is commonly used to control sweating on cold water lines, refrigeration suction piping, or condensate drains. It is also effective for supplemental wrapping on fittings, valves, and unions where molded insulation is impractical. The low-profile design makes it suitable for tight-space retrofits.

Not intended for high-temperature steam or industrial process lines. For best results, store the tape in a cool, dry environment prior to use and apply at ambient temperatures above 40°F.