2 inch x 2 inch x 3/4 inch Carbon Steel 4712 RG Gas Press Reducing Tee Press x Press x Fitting

2" x 2" x 3/4" Carbon Steel Press Reducing Tee – Fuel Gas Rated, Mechanical Branch Fitting

The 2 inch x 2 inch x 3/4 inch carbon steel gas press reducing tee is a mechanically joined fitting designed to transition a reduced branch into larger diameter gas distribution mains. This press-fit tee supports flame-free installation in low- and medium-pressure natural gas and propane systems, offering a durable solution for both retrofit and new construction.

Fitting Performance and Features

This reducing tee is fabricated from carbon steel and is designed to meet performance and installation standards required for mechanically joined gas systems. Key characteristics include:

• ✅ Press-to-Connect Design Allows fast installation using compatible press tool jaws with no flame, threading, or curing required.
• ✅ Steel Body with Corrosion Resistance Constructed from carbon steel with a zinc-plated or epoxy-coated exterior (depending on model), providing protection in indoor and ventilated applications.
• ✅ HNBR Sealing Element Integrated seal rated for gas applications, resistant to hydrocarbons and temperature cycling.
• ✅ Reduced Branch Outlet Sized at 3/4" to support service line drops or zone-specific runs from a 2" main line.

Technical Specifications

• Material: Carbon Steel (ASTM-compliant)
• Connection Type: Press x Press x Press
• Size: 2" x 2" x 3/4"
• Seal: Yellow HNBR (Hydrogenated Nitrile Butadiene Rubber)
• Certifications: CSA-listed, complies with ANSI LC-4 and IAPMO standards for fuel gas piping

Installation Notes

Use an approved press tool and compatible jaws for carbon steel press fittings. Inspect and lubricate seals as needed prior to assembly. Deburr pipe ends and mark insertion depth. Ensure full insertion and correct alignment before pressing. No thread sealant or Teflon tape is required. Always verify pressure ratings and joint spacing per manufacturer instructions.

Applications

Intended for use in gas distribution systems including natural gas and propane. Commonly used in HVAC systems, mechanical rooms, kitchens, multi-family housing, and commercial gas branches. Suitable for installation in exposed or ventilated locations per code, and ideal for reducing installation time in large-diameter steel systems.

Compliance and Use Insight

This press tee is certified for gas service and meets all relevant performance requirements for mechanically joined fuel gas systems. The use of flame-free joining methods supports safer and more efficient installation in occupied buildings or confined areas where hot work permits are restricted.

The 2" x 2" x 3/4" carbon steel gas press reducing tee offers a reliable, jobsite-ready solution for branching gas lines with reduced labor and material handling. Built to meet system design and code requirements, it ensures consistent mechanical integrity and installation efficiency across a wide range of commercial and residential projects.