2 inch x 2 inch x 1 inch Carbon Steel 4712 RG Gas Press Reducing Tee Press x Press x Fitting

2" x 2" x 1" Carbon Steel Press Reducing Tee – Gas Rated

The 2 inch x 2 inch x 1 inch Carbon Steel Gas Press Reducing Tee is engineered for mechanically joined carbon steel piping systems conveying fuel gas. This reducing tee provides a compact solution for transitioning to a reduced branch size while maintaining structural integrity under elevated system pressures.

Product Features and Material Performance

Manufactured from ASTM A420-grade carbon steel, this tee is designed for use in press-connect gas systems and is compatible with standard carbon steel press tools and sealing elements. It supports safe gas distribution in compliance with prevailing mechanical codes and performance requirements.

• ✅ Formed and Machined Ends Precision press profiles ensure uniform sealing and mechanical retention with compatible jaw sets.
• ✅ Carbon Steel Construction Provides high strength and impact resistance suitable for natural gas and propane systems.
• ✅ Reduced Outlet Design Allows transition from 2" main to 1" branch while maintaining optimal flow paths and reducing turbulence.
• ✅ Zinc-Coated Exterior Enhances corrosion protection in concealed or exposed indoor environments.
• ✅ Leak Detection Compatibility Includes features compatible with standard press fitting leak-detection systems during pressure testing.

Technical Specifications

• Material: Carbon Steel (ASTM A420 or equivalent)
• End Connections: Press x Press x Press (Reduced Branch)
• Nominal Sizes: 2" Main x 1" Branch
• Sealing Element: Factory-installed EPDM or HNBR O-ring (depending on application spec)
• Certification: Conforms to ANSI LC-4 / CSA 6.32, NFPA 54, and ICC standards for fuel gas piping

Typical Applications

This reducing tee is commonly specified in fuel gas systems for commercial buildings, multi-unit residential structures, and institutional facilities. It enables compact, no-flame connections in retrofit and new construction projects where brazing or threading is not permitted or practical.

Installation Considerations

Press connections require properly calibrated pressing tools, matching jaws or rings, and verification of fitting alignment and insertion depth. All joints should be visually inspected and pressure-tested according to local code requirements. Not for use in underground systems without manufacturer-approved protection.

The 2" x 2" x 1" Carbon Steel Gas Press Reducing Tee supports time-efficient, code-compliant gas system installations with no flame, fumes, or welding permits required. A reliable component for high-performance mechanical gas distribution networks.