2 inch x 2 inch x 1-1/2 inch Carbon Steel 411 RG Gas Press Reducing Tee Press x Press x Press

Precision Gas Line Integration with the 2 Inch x 2 Inch x 1-1/2 Inch Carbon Steel Press Reducing Tee

Engineered for demanding gas piping systems, the 2 inch x 2 inch x 1-1/2 inch Carbon Steel Press Reducing Tee supports reliable branch connections in high-pressure environments. With a reducing side outlet, this fitting facilitates size transitions while maintaining system integrity—making it a core component for mechanical, commercial, and industrial gas installations.

Technical Advantages for Field Use

• Press x Press x Press Design – Enables quick mechanical joint connections without threading or welding.
• Corrosion-Resistant Coating – Factory-applied zinc-based coating protects carbon steel from environmental degradation.
• Reduced Side Port – 1-1/2 inch branch optimizes gas distribution systems where flow regulation or takeoffs are required.
• Reliable Seal – Fittings are compatible with standard EPDM sealing elements suited for fuel gas applications.

Specification Overview

• Material: Carbon Steel (ASTM A420 or equivalent)
• Inlet/Outlet Sizes: 2 inch x 2 inch x 1-1/2 inch
• Connection Type: Press-fit (mechanical joint, non-threaded)
• Application: Fuel gas systems (natural gas, propane), commercial and industrial use
• Standards: Typically conforms to ASME B16.9 or press-specific system certifications such as CSA LC4, ANSI Z223.1

Installation Guidance

Install using a compatible press tool with approved jaws sized for 2" and 1-1/2" tubing. Prior to pressing, ensure pipe ends are properly deburred and insertion depth is verified. Use only with approved sealing elements and system-compatible piping. Pressure testing should be conducted per local code requirements and manufacturer guidelines.

Typical Applications

This reducing tee is widely used in gas distribution manifolds, rooftop gas lines, and mechanical rooms where branch connections are needed at reduced diameters. Its press system design reduces installation time and labor on retrofit and new-build projects alike.

Note for Contractors

Always verify that fittings are installed within their pressure and temperature ratings, and that they are used with compatible system components. For critical installations, refer to third-party listings or approvals specific to fuel gas systems.