2 inch x 1-1/2 inch Galvanized Iron 90 Degree Reducing Elbow Female x Female

2 inch x 1-1/2 inch Galvanized Iron 90° Reducing Elbow – Constructed for Demanding Piping Systems

The 2 inch x 1-1/2 inch Galvanized Iron 90 Degree Reducing Elbow provides a dependable solution for directional changes in pipe runs that require a reduction in size. Manufactured to industry standards, this fitting enables a 90-degree change in direction while transitioning between two nominal pipe sizes in galvanized piping systems.

Designed for mechanical strength and dimensional accuracy, this threaded elbow features female NPT (National Pipe Thread) ends for secure mating with male-threaded steel pipe. It is well-suited for both new construction and system retrofits where corrosion resistance and pressure integrity are required.

Performance Characteristics

• ✅ Galvanized Iron Body – Zinc-coated to improve resistance to corrosion in water, air, and non-corrosive gas applications.
• ✅ Threaded Fittings – Female NPT threads conform to ANSI/ASME B1.20.1 standards, providing a consistent and secure seal with compatible pipe.
• ✅ Pressure Rating – Suitable for low- to moderate-pressure piping systems where threaded malleable iron fittings are specified.
• ✅ Transition Capability – Reduces from 2 inches to 1-1/2 inches, making it effective for step-down connections within tight service zones.

Installation Guidelines

Apply appropriate thread sealant (e.g., PTFE tape or thread compound) to male threads prior to installation. Use pipe wrenches to torque connections securely, taking care to avoid over-tightening. For optimal results, connections should be made according to applicable codes and inspected for leaks under working pressure.

Product Specifications

• Material: Galvanized Malleable Iron
• Size: 2 inch x 1-1/2 inch
• Thread Type: NPT – Female x Female
• Angle: 90 Degrees
• Conformance: Meets ASTM A197 and ASME B16.3 standards for malleable iron fittings

Applications

This reducing elbow is frequently used in water distribution, fire protection loops (non-potable), natural gas, and air systems. Its 90-degree configuration supports transitions around walls, structural beams, or within mechanical rooms where space limitations require directional changes with reduced pipe diameter.

Field Note

While galvanized iron is corrosion-resistant, it is not recommended for use in systems carrying highly corrosive substances or for potable hot water service beyond local code allowances due to potential interior scaling.

The 2 inch x 1-1/2 inch Galvanized Iron 90° Reducing Elbow delivers mechanical strength and reliable flow performance across a variety of systems. Its threaded, galvanized construction makes it a dependable choice for both maintenance and new system design in commercial and residential plumbing environments.