2 inch Copper Coupling less Stop Copper x Copper
118 Available At All US Supply Locations
2" Copper Coupling – Seamless Transitions for Pressurized Plumbing Systems
The 2" copper coupling is a straight, sweat-type fitting designed to join two sections of copper tubing of equal diameter. Manufactured from wrought copper to ASTM B75/B88 standards, this coupling supports Type L and Type M copper tube in both potable water and hydronic systems. It enables a secure, continuous flow path with minimal turbulence or restriction.
Product Features
- ✅ Seamless Compatibility Designed to accommodate 2-inch nominal copper tubing per standard sizing tolerances, ensuring interference fit when soldered or brazed.
- ✅ Lead-Free Compliance Fabricated from lead-free copper alloy, suitable for use in drinking water systems under the Safe Drinking Water Act (SDWA).
- ✅ Corrosion Resistance Copper resists pitting and scale buildup in domestic water service applications, providing long service life.
- ✅ Uniform Wall Thickness Enables consistent heat transfer during soldering and reliable bonding strength across all joints.
- ✅ Meets Code Requirements Listed and certified for potable water systems and inspected installations under IPC, UPC, and state codes.
Technical Specifications
- Material: Wrought Copper Alloy (C12200)
- Nominal Size: 2 inch
- Connection Type: Cup x Cup (Sweat)
- Applicable Tubing: Type L, M copper tube (ASTM B88)
- Conformance: ANSI/ASME B16.22, NSF/ANSI 61 & 372 (lead-free)
Applications
This copper coupling is commonly installed in domestic water distribution, hydronic heating loops, chilled water supply, and other mechanical piping systems requiring a soldered joint. It is also suitable for pressure-rated HVAC piping and vertical risers in multi-story buildings. Use in both new construction and retrofit environments is typical.
Installation Considerations
Ensure tubing ends are properly cleaned and deburred. Use approved lead-free solder and flux. Heat uniformly to achieve full capillary action across the joint. Allow joints to cool before applying system pressure. Confirm all assemblies meet local code inspection requirements before closing walls or ceilings.
The 2" copper coupling provides the precision and integrity required for modern plumbing systems. Its compatibility with industry-standard copper tubing and reliable joint performance make it a trusted component in high-demand installations.
Specifications
| Weight | 0.530000 |
|---|---|
| Brand | Brand May Vary |
| Application | Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) |
| Height | 3.75 |
| Length | 2.8 |
| Width | 3.5 |
| End Style | Copper x Copper |
| Side A | 2" |
| Side B | 2" |
| Fitting Type | Coupling |
| Item Type | Coupling |
| MPN | PF 01909 |
| Material | Copper |
| Product Family | Fittings |
| Warranty | 50 Years Limited |
| Item Returns | This item can be returned |