1 inch x 1 inch x 3/4 inch Carbon Steel 411 RG Gas Press Reducing Tee Press x Press x Press

1 Inch x 1 Inch x 3/4 Inch Carbon Steel Gas Press Reducing Tee – For Natural Gas and Fuel Line Systems

The 1 inch x 1 inch x 3/4 inch Carbon Steel Gas Press Reducing Tee is a mechanically pressed fitting designed for joining carbon steel pipe in fuel gas distribution systems. This reducing tee provides two full-size run connections with a reduced branch outlet, enabling system branching while maintaining consistent gas flow and pressure ratings. It is compatible with standard press tools and jaws suitable for carbon steel applications.

Technical Features

Constructed from corrosion-resistant carbon steel and coated for protection in gas environments, this press tee is engineered to meet rigorous mechanical and performance standards. The press connections eliminate the need for welding, threading, or grooving, significantly reducing installation time and fire risk in enclosed spaces.

• ✅ Material: ASTM-compliant carbon steel with corrosion-resistant coating (e.g., zinc-plated or electrocoated)
• ✅ End Connections: Press-to-connect (suitable for schedule 10 and 40 carbon steel pipe)
• ✅ Pressure Rating: Up to 125 PSI for fuel gas per NFPA 54/ANSI Z223.1
• ✅ Temperature Range: -20°F to 200°F for gas distribution systems
• ✅ Branch Size: Reduces to 3/4 inch from 1 inch run

Approved Applications

This reducing tee is rated for use in indoor and outdoor gas piping systems, including but not limited to:

• • Natural gas and propane distribution in commercial and residential structures
• • Appliance feed lines to equipment such as boilers, water heaters, and HVAC units
• • Multi-branch manifolds in high-efficiency heating systems

Installation Considerations

Fitting should be installed using manufacturer-approved press tools equipped with properly calibrated jaws specific to carbon steel profiles (e.g., M-profile or compatible). Tubing must be cut square, deburred, cleaned, and marked for insertion depth prior to pressing. No additional welding, threading compounds, or mechanical fasteners are necessary. Verify joint integrity per local inspection protocols after pressing.

• ✅ No Flame Required: Ideal for retrofit work in occupied or enclosed environments
• ✅ Reduced Labor Time: Faster than threading or welding, with consistent sealing
• ✅ Minimal Downtime: Enables quicker reactivation of gas lines in service work

Certifications and Compliance

• Standards: Compliant with NFPA 54 (National Fuel Gas Code)
• Approvals: Typically listed to ANSI LC-4/CSA 6.32 for press-connect fittings for gas
• Inspection Compatibility: Press indicators or inspection ports available on select models

The 1 inch x 1 inch x 3/4 inch Carbon Steel Gas Press Reducing Tee offers a mechanically secure solution for fuel gas piping configurations where space efficiency and installation speed are essential. It provides a reliable, flame-free alternative to traditional jointing methods, backed by national code compliance for both new construction and renovation work.