1 inch Sharkbite Push Fitting Tee Sharkbite x Sharkbite x Sharkbite

SharkBite 1 inch Lead-Free Push-Fit Tee – Certified Transition Tee for Copper, CPVC, and PEX

The SharkBite 1 inch Push-Fit Tee is a lead-free brass fitting designed for use in potable water distribution systems. It connects three lines of 1 inch nominal pipe using push-to-connect ends, enabling fast, solder-free transitions between copper, CPVC, and PEX without the need for additional tools, glue, or clamps.

Key Features and Functional Benefits

• ✅ Push-to-Connect Technology – No soldering, crimping, or gluing required; inserts onto pipe with a secure O-ring seal and stainless steel grab ring.
• ✅ Material: DZR (dezincification-resistant) lead-free brass – certified under NSF/ANSI 61 and 372 for potable water use.
• ✅ Working Pressure: Rated to 200 psi at 73°F and 100 psi at 180°F (PEX), suitable for standard residential and light commercial water systems.
• ✅ Demountable and Reusable – Compatible with SharkBite disconnect clips and tongs, allowing for future servicing or system modifications.
• ✅ Third-Party Tested – Complies with ASSE 1061 and UPC (IAPMO) standards; listed for use in underground and behind-the-wall applications without access panels (as permitted by code).

Technical Specifications

• Body Material: Forged brass (lead-free)
• Connection Type: Push-Fit (all ends – tee configuration)
• Nominal Size: 1 inch x 1 inch x 1 inch
• O-Ring Material: EPDM (suitable for potable water, not for gas or oil)
• Application: Cold and hot potable water distribution
• Certifications: NSF/ANSI 61, NSF/ANSI 372, ASSE 1061, UPC

Installation Guidelines

Ensure all pipe ends are cut square, deburred, and free of scoring. Use SharkBite depth gauges to mark the insertion depth before connecting. Fully insert each pipe until it reaches the depth mark for a watertight seal. The fitting can be rotated after installation but should not be twisted during insertion. For PEX installations, insert stiffeners are pre-installed and should remain in place.

Use Cases and Common Applications

This 1 inch Push-Fit Tee is suitable for branching potable water lines in residential single-family dwellings, multifamily buildings, or light commercial structures. It provides a reliable, tool-free solution for system expansions, reroutes, and repair installations where speed and code compliance are critical.

Note on Compatibility

Approved for use with Type K, L, and M copper tubing (CTS), CPVC (SDR 11), and PEX (ASTM F876/F877) tubing. Not rated for iron pipe or for use in hydronic heating systems using glycol solutions unless approved by the manufacturer.

The SharkBite 1 inch Push-Fit Tee delivers code-approved flexibility and ease of use for professional contractors working across a variety of piping materials and job site conditions. When properly installed, it offers a durable, reusable, and secure solution that minimizes installation time while meeting rigorous plumbing standards.