1 inch Carbon Steel 406 G 45 Degree Gas Press Elbow Press x Press

1" Carbon Steel 45° Press Elbow – Fuel Gas Rated, ASTM A420

The 1" Carbon Steel 45-Degree Gas Press Elbow is a factory-formed press fitting engineered for use in fuel gas distribution systems. Manufactured from zinc-plated carbon steel to ASTM A420 standards, this elbow is designed for high-integrity directional changes while maintaining full flow and pressure retention. It features a 45° bend with press-to-connect ends and an integrated yellow HNBR sealing element approved for natural gas and propane service.

This elbow is compatible with press systems using standard pressing tools approved for carbon steel fittings. Designed for use in above-ground, non-potable fuel gas systems, it allows for safe and flame-free installation in both new and retrofit applications.

Specifications

• ✅ Material: Zinc-plated carbon steel (ASTM A420)
• ✅ Nominal Size: 1 inch
• ✅ Angle: 45 degrees
• ✅ Connection Type: Press x Press (for use with carbon steel pipe)
• ✅ Seal Element: HNBR (yellow) – fuel gas rated
• ✅ Operating Pressure: Up to 200 PSI
• ✅ Temperature Range: -40°F to 180°F
• ✅ Certifications: ANSI Z21.24 / CSA 6.10, IAPMO listed, ASME B16.51 compliant

Application Scope

Designed for use in press-type piping systems conveying fuel gas in residential, commercial, and light industrial applications. This elbow is suitable for:

• ✅ Natural gas and propane distribution
• ✅ Gas-fired appliance and equipment connections
• ✅ Mechanical rooms, rooftop units, and confined-space installations
• ✅ Above-ground fuel gas infrastructure compliant with applicable codes

Installation Guidance

Must be installed using compatible carbon steel press tools and jaws. Pipe ends should be clean, deburred, and marked for full insertion. After assembly, pressing must be completed per manufacturer torque and tool calibration specifications. Visual confirmation of proper press completion is essential. Testing should be conducted in accordance with NFPA 54 or local gas code requirements.

Performance and Design Highlights

• ✅ Press-Fit Assembly: Enables fast, flame-free connections with minimal downtime
• ✅ Corrosion Protection: Zinc-plated surface improves durability in dry environments
• ✅ Positive Leak Indication: Leak detection feature identifies unpressed joints during pressure testing
• ✅ Code-Compliant: Meets major fuel gas code requirements when installed correctly

Compliance Note

This fitting is certified for use in fuel gas piping systems per ANSI Z223.1/NFPA 54 and must be installed by qualified personnel. Not suitable for potable water or direct burial unless specifically approved.

The 1" Carbon Steel 45° Gas Press Elbow is a critical component for safe and efficient directional changes in fuel gas systems. Engineered for performance and reliability, it supports fast installation without compromising compliance or safety in commercial-grade mechanical applications.