#1/4 x 1" Stove Bolts with Nut and Combination Round Head, Pack of 100

M Green CRHSB14X1 Stove Bolts with Nut & Combination Round Head, 1/4″ × 1″ (Pack of 100)

These stove bolts are combination-drive round head machine screws with matching nuts, commonly used in HVAC, appliance, sheet metal, or general assembly tasks. This pack provides 100 matched sets, ideal for bulk replacement or production use.

• Part / model number: CRHSB14X1 (M Green) :contentReference[oaicite:0]{index=0}
• Quantity: 100 sets (bolt + nut) per package :contentReference[oaicite:1]{index=1}
• Bolt diameter (shank / nominal): 1/4 inch (0.25 in) :contentReference[oaicite:2]{index=2}
• Thread length: 1 inch :contentReference[oaicite:3]{index=3}
• Drive / head style: Combination round head (slotted / Phillips) :contentReference[oaicite:4]{index=4}
• Nut: Standard hex nut included with each bolt (matched size) :contentReference[oaicite:5]{index=5}
• Material: Steel (commonly carbon steel) :contentReference[oaicite:6]{index=6}
• Finish / coating: Zinc plated (for corrosion protection) :contentReference[oaicite:7]{index=7}
• Thread specification: UNC standard threads (20 threads per inch typical for 1/4-inch bolts) :contentReference[oaicite:8]{index=8}
• Package / item dimensions (for shipping / inventory):
  • Length: ~4.15 in :contentReference[oaicite:9]{index=9}
  • Width: ~3.25 in :contentReference[oaicite:10]{index=10}
  • Height: ~2.15 in :contentReference[oaicite:11]{index=11}
  • Weight: ~2.210 lb (package) :contentReference[oaicite:12]{index=12}
• Standards & conformity:
  • Manufactured to general machine screw / fastener norms (e.g. thread tolerances per ASME / ANSI for 1/4-20 UNC) (implied from zinc plated stove bolt specs) :contentReference[oaicite:13]{index=13}
  • Finish meets common zinc plating corrosion resistance expectations for general-purpose fasteners
• Intended uses / applications:
  • Mounting / fastening sheet metal parts, HVAC components, stoves, appliances, panels, ductwork.
  • Replacement hardware in repair kits or maintenance supplies for heating / cooling / appliance service.
• Compatibility & installation notes:
  • Ensure nut and bolt threads are clean and free of burrs before assembly.
  • Do not overtighten; torque to appropriate values for 1/4-inch steel bolts to avoid thread stripping.
  • Use anti-seize or lubricant on threads if in corrosive or high temperature environment, to ease later removal.
  • Verify bolt length includes head height; ensure sufficient thread engagement in the nut or mating component.
  • If used in high humidity or corrosive environments, periodic inspection and replacement may be prudent despite zinc plating protection.

Technical & Performance Notes

• The combination round head (slotted / Phillips) allows versatility in driver tools (flat blade or Phillips) for installation flexibility.
• Zinc plating provides moderate corrosion resistance; not suited for extremely corrosive or outdoor saltwater environments without supplemental protection.
• Thread tolerances should match standard 1/4-20 UNC class (typically class 2A / 2B for general fasteners) if mating parts conform.
• The included nut is sized for full 1/4-20 threading; full thread engagement is possible given the 1-inch thread length.
• Useful as general-purpose hardware in assemblies where strength demands are moderate (not structural load bearing in heavy duty applications).