1/4 Pint PVC Cement with Applicator Cap

Details

Model: 14009
Manufacturer: IPS Weld-On
Product Name: Weld-On 781 PVC Solvent Cement
Part Number: 1938874
Container Size: 1/4 Pint (4 fl oz) Can
Description: Medium-bodied, fast-setting, high-strength solvent cement formulated for PVC pipe and fittings up to 6 inches in diameter. Suitable for both pressure and non-pressure piping systems requiring solvent-welded joints.

Product Overview

Weld-On 781 PVC Solvent Cement is engineered for professional installation of PVC piping systems across plumbing, industrial, and mechanical applications. The cement’s medium body and fast-set characteristics provide efficient assembly while ensuring a high-strength, chemically fused joint. Its low VOC formulation meets stringent environmental requirements without compromising performance. Designed for interference-fit PVC connections, this cement supports system integrity under both pressure and non-pressure conditions. Weld-On 781 is suitable for use in potable water, irrigation, and process piping systems where dependable joint strength and rapid installation are critical.

Technical Specifications

• Manufacturer Part Number: 14009
• Alternate Part Number: 1938874
• Product Type: PVC Solvent Cement
• Body Type: Medium-bodied
• Set Type: Fast-setting
• Color: Clear
• Viscosity: Medium syrupy liquid
• Container Size: 1/4 Pint (4 fl oz) metal can with brush applicator
• Base Chemistry: Ketone-based solvent blend
• Chemical Composition: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone, Acetone
• Specific Gravity: 0.920 ± 0.02
• VOC Content: <510 g/L (Low VOC formulation)
• Flash Point: -4°F (-20°C), closed cup
• Set Time: Fast; dependent on pipe size, temperature, and humidity
• Pipe/Fitting Range: All classes and schedules up to 6 in. (160 mm) diameter; Schedule 80 through 4 in. (110 mm)
• Joint Type: Solvent-welded, interference-fit connection
• Pressure Rating: Suitable for pressure and non-pressure PVC piping systems
• Primer Requirement: Required for pressure-rated systems; optional for non-pressure systems if approved by local code
• Service Temperature: Up to 140°F (60°C)
• Compliance: ASTM D2564, NSF/ANSI 61 (potable water), SCAQMD Rule 1168/316A (Low VOC)
• Shipping Classification: ORM-D, Consumer Commodity
• Application Range: Water distribution, industrial process piping, and drainage systems

Installation Notes

• Inspect pipe and fitting surfaces for dirt, grease, and moisture prior to assembly.
• Apply approved primer where required by code or for pressure-rated systems.
• Apply an even coat of solvent cement to both pipe and fitting socket using the included brush applicator.
• Assemble joint immediately with a quarter-turn twist to evenly distribute cement.
• Hold assembled joint in place for several seconds to prevent separation; wipe away excess cement.
• Allow joint to set and cure according to Weld-On recommended time charts before pressure testing.
• Store cement in its original sealed container, away from direct sunlight or heat sources.

Summary

The IPS Weld-On 781 PVC Solvent Cement (1/4 Pint) is a professional-grade, clear, medium-bodied, fast-setting adhesive formulated for high-strength bonding of PVC pipe and fittings. With a low VOC composition, superior solvent penetration, and compliance with ASTM and NSF standards, it provides reliable, code-approved performance in both pressure and non-pressure piping systems across commercial and industrial installations.