1/4 Pint CPVC Pipe Cement with Applicator Cap by Weld-On.

Weld-On FlowGuard Gold™ CPVC Plumbing Cement – 1/4 Pint, Medium Body, Fast-Setting

Weld-On FlowGuard Gold™ CPVC Plumbing Cement is a professional-grade solvent cement formulated for high-strength joining of CPVC piping systems in potable water distribution and plumbing installations. Engineered for copper tube size (CTS) CPVC pipe and fittings up to 2 inches (63 mm) in diameter, this medium-bodied, yellow cement provides fast-setting performance and durable bonding strength in both pressure and non-pressure systems. It is designed to meet professional installation standards, delivering consistent reliability and compatibility with FlowGuard Gold™ CPVC piping.

Technical Specifications

• Product Code: 11029
• Manufacturer: IPS Corporation
• Brand: Weld-On® FlowGuard Gold™
• Type: CPVC Solvent Cement
• Container Size: 0.25 Pint (1/4 Pint) Metal Can
• Application: For CPVC Copper Tube Size (CTS) pipe and fittings up to 2 inches (63 mm)
• Service Use: Potable water systems rated to 180°F (82°C)
• Viscosity: Medium-bodied, syrupy liquid
• Color: Yellow
• VOC Content: < 490 g/L (Low VOC formulation)
• Flash Point: -20°C
• Specific Gravity: 0.986
• Composition: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone
• Setting Time: Fast setting for efficient installation
• Primer Requirement: May be used without primer where local codes permit
• Regulatory Classification: Consumer Commodity ORM-D
• Application Temperature Range: Recommended for ambient conditions consistent with professional CPVC joining standards

Professional Application and Performance

Weld-On FlowGuard Gold™ CPVC Plumbing Cement is designed for use by professional contractors requiring rapid, consistent, and high-integrity joints in potable water distribution systems. The medium-bodied viscosity ensures uniform coverage and controlled flow during application, minimizing waste and ensuring complete surface fusion. Upon application, the solvent blend chemically softens and fuses CPVC surfaces, producing a permanent molecular bond after curing. The formulation’s fast-setting characteristics enable reduced installation times while maintaining full compliance with industry performance standards. Low VOC emissions meet environmental and occupational safety requirements, supporting its use in both residential and commercial environments. When used as specified, this cement maintains long-term hydraulic performance and joint integrity under rated temperature and pressure conditions.

Summary

The Weld-On FlowGuard Gold™ CPVC Plumbing Cement (1/4 Pint) is a professional, medium-bodied, fast-setting solvent cement designed for joining FlowGuard Gold™ CPVC piping systems up to 2 inches in diameter. It provides durable, high-strength, and low-VOC performance suitable for potable water applications, meeting professional installation requirements with efficient curing and long-term system reliability.