1/2" x 100' Vinyl Tubing, Clear

Mars 79133 – 1/2" x 100' Clear Vinyl Tubing The Mars 79133 clear vinyl tubing is designed for fluid handling in low-pressure systems. With a 1/2-inch inner diameter and 100-foot coil length, this tubing is suitable for air lines, light-duty water transfer, and non-potable applications in residential and commercial environments. The transparent construction allows for easy visual inspection of flow conditions, and the flexible PVC material provides ease of routing during installation. Product Features Material: Non-reinforced clear polyvinyl chloride (PVC) Inner Diameter: 1/2 inch Outer Diameter: 5/8 inch Wall Thickness: 1/16 inch (0.0625") Length: 100 feet Working Pressure: Rated at 24 psi at 70°F Operating Temperature Range: 25°F to 150°F (typical for PVC tubing) Application Suitability: Air and fluid transfer where visual monitoring is necessary Clarity: Transparent tubing for flow visibility Compliance: Phthalate-free construction; not certified for potable water use Application Guidance Mars 79133 vinyl tubing is intended for use in general-purpose, low-pressure fluid and air transfer systems. Common applications include: Utility drains Condensate removal Low-pressure pneumatic lines Non-potable water circulation Not rated for high-pressure applications, pressurized potable water supply, or steam systems. Use only where allowed by code and manufacturer specifications. Installation Notes Cut using a tubing cutter or sharp utility knife for clean edges Use barbed or compression fittings with clamps to ensure a secure seal Avoid exposure to direct sunlight for extended periods; vinyl material may degrade under UV