1/2 inch Galvanized Iron 90 Degree Elbow Female x Female

1/2" Galvanized Malleable Iron 90° Elbow – Threaded Fitting for Directional Piping Transitions

The 1/2" GALV MAL 90 ELL is a galvanized malleable iron elbow designed for creating 90-degree directional changes in threaded steel pipe systems. Manufactured to standard IPS (Iron Pipe Size) dimensions, this elbow ensures secure, pressure-rated connections suitable for plumbing, mechanical, and gas distribution systems.

With a hot-dip galvanized coating applied over malleable cast iron, this fitting offers enhanced resistance to corrosion in both indoor and exterior environments. Its threaded female ends are machined to ANSI/ASME B1.20.1 NPT specifications, providing reliable engagement with mating pipe or fittings.

Performance Features

• ✅ Galvanized Iron Body – Malleable cast iron construction with zinc coating provides mechanical strength and moderate corrosion resistance.
• ✅ Standard Taper Threads – Female NPT threads ensure compatibility with Schedule 40 black or galvanized pipe for secure mechanical joints.
• ✅ 90-Degree Turn – Facilitates tight-radius directional changes in confined spaces such as wall cavities, mechanical chases, or vertical drops.
• ✅ Code-Compliant – Manufactured to meet dimensional and material standards required in residential, commercial, and industrial piping installations.

Installation Requirements

Threaded installation requires proper pipe alignment and sealing. Prior to assembly, ensure mating threads are clean and apply approved thread sealant or PTFE tape. Use pipe wrenches to tighten, being careful not to overtighten and crack the casting. This fitting is suitable for use in threaded iron pipe systems carrying water, air, gas, or non-corrosive fluids.

Common Applications

Frequently installed in hydronic systems, gas piping layouts, HVAC mechanical lines, and low-pressure water distribution. Its compact 90-degree geometry supports installations in limited-space environments or tight directional transitions around structural elements.

Material and Usage Insight

Galvanized malleable iron is a cost-effective solution for non-potable piping systems requiring threaded joints and protection against rust. The zinc coating protects exposed surfaces and is suitable for indoor utility rooms or sheltered outdoor applications.

Technical Specifications

• Material: Galvanized Malleable Iron
• Nominal Size: 1/2 inch
• Connection: Female NPT x Female NPT
• Bend Angle: 90 degrees
• Compliance: Conforms to ANSI/ASME B16.3 and B1.20.1 standards

The 1/2" GALV MAL 90 ELL is engineered for structural integrity and long-term reliability in pressure-rated threaded systems. Specify this fitting when precise directional changes are required in gas, air, or water systems using galvanized or black iron piping.