1/2 inch CPVC 45 Degree Elbow Plastic x Plastic

1/2 inch CPVC 45° Elbow – Socket x Socket Fitting for Potable Water Applications

The 1/2 inch CPVC 45 Degree Elbow is a solvent-welded pressure fitting used in chlorinated polyvinyl chloride (CPVC) systems to change flow direction by 45 degrees. Designed for use in hot and cold potable water distribution systems, this elbow fitting supports clean, space-efficient directional transitions without compromising system integrity.

Manufactured from CPVC materials conforming to ASTM D2846, this fitting meets requirements for use in residential, commercial, and institutional water piping systems where durability and code compliance are critical. Its socket ends accommodate copper tube size (CTS) CPVC pipe for a smooth and secure solvent-weld connection.

Professional-Grade Benefits

• ✅ Certified Lead-Free CPVC – Complies with NSF/ANSI 61 and 372 standards for potable water safety in all jurisdictions.
• ✅ Angle Optimization – 45° bend allows for gradual directional changes, reducing turbulence and maintaining efficient flow.
• ✅ Solvent Weld Socket Ends – Designed for permanent bonding with CTS CPVC piping using approved solvent cement per ASTM F493.
• ✅ High Temperature Rating – Suitable for continuous service up to 180°F at appropriate pressure ratings.
• ✅ Corrosion-Resistant Construction – Inherently resistant to pitting, scaling, and chemical degradation common in metal piping systems.

Specifications

• Material: Chlorinated Polyvinyl Chloride (CPVC)
• Size: 1/2 inch nominal (CTS)
• Connection: Socket x Socket (solvent weld)
• Standards: ASTM D2846, NSF/ANSI 61 & 372, UPC/IAPMO Listed
• Temperature/Pressure Rating: 100 PSI @ 180°F (per applicable design criteria)

Installation Notes

Prepare pipe and fitting surfaces by cleaning and applying CPVC-specific primer and solvent cement per manufacturer recommendations. Insert the pipe fully into the socket and hold in place briefly to set. Allow proper cure time before pressure testing. This fitting is intended for use in permanently assembled systems; do not reuse.

Typical Use Cases

This 45° elbow is used in CPVC pressure systems to route around structural obstructions, reduce fitting count, and maintain efficient piping geometry. Commonly installed in domestic water supply lines, hot water recirculation loops, and mechanical chase runs where compact directional changes are required.

Code and Compliance Insight

CPVC fittings certified to NSF/ANSI 61 and 372 are required by federal law for use in potable water systems in the U.S. This product is compliant with IPC, UPC, and CPC code requirements for both residential and commercial plumbing installations.

The 1/2 inch CPVC 45° Elbow provides a durable, thermally stable, and code-approved solution for directional changes in potable water systems. Its solvent-weld design ensures long-term sealing performance and installation efficiency in both new construction and retrofit applications.