1-1/2 inch x 1-1/2 inch x 3/4 inch Carbon Steel 411 RG Gas Press Reducing Tee Press x Press x Press

1-1/2" x 1-1/2" x 3/4" Carbon Steel Press Reducing Tee – Gas Rated for Commercial and Residential Systems

The 1-1/2" x 1-1/2" x 3/4" Carbon Steel Gas Press Reducing Tee is engineered for use in fuel gas distribution systems requiring consistent pressure performance, mechanical integrity, and flame-free installation. Designed for compatibility with press-fitting tools, this tee allows for secure branching between primary and reduced-size gas lines.

Manufactured from carbon steel and conforming to specifications for fuel gas applications, this tee incorporates press connections for fast, flame-free installations in both new construction and retrofit scenarios. Its reduced branch size enables system flexibility while preserving flow characteristics and regulatory compliance.

Key Performance Features

• ✅ Press x Press x Press Configuration – Provides a mechanically robust, flame-free joining solution for carbon steel piping systems.
• ✅ Gas System Rated – Manufactured in accordance with performance and safety requirements for natural gas and propane systems.
• ✅ Zinc-Coated Carbon Steel Body – Enhances corrosion resistance and long-term performance in exposed and concealed environments.
• ✅ EPDM Sealing Elements – Engineered to maintain gas-tight seals across a wide range of pressures and temperatures, as required by applicable code.

Specifications

• Material: Carbon Steel (zinc-plated)
• Connection: Press x Press x Press
• Dimensions: 1-1/2" x 1-1/2" x 3/4"
• Sealing Element: Yellow-marked EPDM, gas-rated
• Standards: Complies with ANSI LC 4 / CSA 6.32 for fuel gas systems

Application Scope

Used extensively in residential, commercial, and industrial fuel gas systems for branching from main supply lines. Suitable for both interior and exterior runs, including concealed installations behind walls and above ceilings where press technology reduces the need for hot work permits or fire watch procedures.

Installation Insight

Press connections must be made using approved press tools with compatible jaws. Verify that tubing is cut square, deburred, and marked for insertion depth. Joint verification should follow manufacturer torque and pressure test procedures. Use only with systems specified for carbon steel and yellow EPDM gaskets.

The 1-1/2" x 1-1/2" x 3/4" Carbon Steel Gas Press Reducing Tee supports reliable, code-compliant connections across a broad range of fuel gas installations. For contractors requiring performance and speed without compromising safety or regulatory alignment, this press tee is a proven solution.