1-1/2 inch x 1-1/2 inch x 1 inch Carbon Steel 4712 RG Gas Press Reducing Tee Press x Press x Fitting

1-1/2” x 1-1/2” x 1” Carbon Steel Gas Press Reducing Tee – Engineered for Demanding Gas Distribution Systems

The 1-1/2” x 1-1/2” x 1” Carbon Steel Press Reducing Tee is specifically designed for use in commercial and industrial gas systems. Manufactured from high-strength carbon steel and incorporating press-fit technology, this tee supports secure branch connections while maintaining full system integrity under pressure.

Designed for joining Schedule 10 or Schedule 40 steel pipe in fuel gas applications, this reducing tee allows for a consistent flow path with reduced turbulence. Its press connections are compatible with standard press tools and jaws, providing reliable, flame-free installation without the need for welding or threading.

Product Features

• ✅ Carbon Steel Body – Constructed from ASTM A420 Grade WPL6 or equivalent material for mechanical strength and corrosion resistance in dry fuel gas applications.
• ✅ Press Connections – Press x Press x Press configuration for fast, consistent joint integrity without heat or open flame.
• ✅ EPDM Sealing Elements – Factory-installed HNBR seals rated for natural gas and propane service in accordance with ANSI Z223.1/NFPA 54.
• ✅ Reduced Branch Outlet – 1” takeoff supports reduced-size lateral connections without requiring additional bushings or reducers.
• ✅ Tested and Certified – Conforms to ASTM F3226 and is listed to CSA LC-4 for fuel gas systems; compliant with UPC and IPC codes where applicable.

Specifications

• Material: Carbon Steel
• Inlet/Outlet Sizes: 1-1/2” x 1-1/2” x 1”
• Connection Type: Press x Press x Press
• Seal Type: HNBR O-Ring (pre-installed)
• Operating Pressure: Up to 125 psi for gas systems
• Temperature Range: -40°F to 180°F
• Standards: CSA LC-4, ASTM F3226

Installation Guidance

This fitting must be installed using compatible press tools with appropriate jaw sets. Ensure pipe ends are properly deburred, marked, and inserted fully into the fitting prior to pressing. Do not lubricate the sealing element. Pressure testing per applicable fuel gas code is required after installation to verify integrity.

Common Applications

Used in carbon steel piping systems for natural gas and LP gas distribution, this reducing tee is ideal for applications in boiler rooms, mechanical systems, and commercial building gas lines. The press technology streamlines installation in both retrofit and new construction scenarios.

Did You Know?

Press connection fittings for gas are approved in numerous jurisdictions due to their speed of installation and reduced fire risk, particularly in occupied buildings where open flame joining is restricted.

When reliability, speed, and code compliance are required, the 1-1/2” x 1-1/2” x 1” Carbon Steel Gas Press Reducing Tee delivers on all fronts. A professional-grade solution for efficient gas line installation in demanding conditions.