50 Gal. Short Power Vent Water Heater, Residential, LPG, 32,000 BTU

Rheem Professional Classic Series 50-Gallon LP Power Vent Water Heater – 32,000 BTU

The Rheem PROG50S-32P-RH67-PV is a 50-gallon liquid propane (LP) water heater designed for residential applications where power venting is required. With a burner input of 32,000 BTU/h and a recovery rate of 32.4 GPH at a 90°F rise, this model delivers dependable performance for moderate hot water demands. It is part of Rheem’s Professional Classic Series, offering contractors a reliable and installation-flexible solution that complies with current energy efficiency standards.

This model includes an integrated blower for power vent operation, suitable for up to 100 equivalent feet of 2" or 3" PVC, CPVC, or ABS venting. It also features silicon nitride hot surface ignition, a self-diagnostic gas control system, and a factory-installed T&P relief valve. The tank is protected by a glass lining and a magnesium anode rod for corrosion resistance.

Product Specifications

• Fuel Type: Liquid Propane (LP)
• Input: 32,000 BTU/hr
• Recovery Rate: 32.4 gallons per hour at 90°F temperature rise
• Capacity: 50 gallons nominal
• Uniform Energy Factor (UEF): 0.67
• Ignition: Silicon nitride hot surface ignition system
• Venting: Power vent with up to 100 equivalent feet using 2" or 3" PVC/ABS/CPVC
• Electrical Requirement: 120V, 60 Hz power for blower
• Water Connections: 3/4" NPT, top-mounted
• Tank Protection: Glass-lined tank with anode rod
• Height: 62-1/2 inches
• Diameter: 23-3/4 inches
• Warranty: 6-year limited warranty on tank and parts

System Features

• Power Vent Configuration: Designed for installations where standard vertical venting is not possible or practical
• Control System: Electronic gas control with LED status indicators for diagnostics and service support
• Low-NOx Burner: Compliant with emissions requirements where applicable
• Condensate Handling: Suitable for use with condensate drain routing where required

Installation Guidelines

Installation of the PROG50S-32P-RH67-PV should be performed by a licensed professional. The power vent system requires adherence to venting specifications outlined in the installation manual, including slope, termination, and support. Proper electrical and LP gas supply must be verified before operation. Local code compliance is mandatory for safe and effective installation.

Professional Applications

This model is suitable for new construction or replacement installations in single-family residences requiring LP fuel and power vent configuration. It offers a balance of capacity, efficiency, and venting flexibility, making it a reliable option for contractors seeking a straightforward and dependable hot water solution.